Innovative

Flexo Plate

  • Models :
    @2430 / @3040 / @4050
  • Plate Making Size :
    @ 2430 = 24 x 30 inch (610 x 762 mm)
        @ 3040 = 30 x 40 inch (762 x 1016 mm)
        @ 4050 = 40 x 50 inch (1016 x 1270 mm)
  • Exposure + Treatment Unit (ET) + Washout + Drying Unit (WD)
(cm) @2430WD @2430ET @3040WD @3040ET @4050WD @4050ET
Machine Size 120X110X90 132X120X60 130X130X100 145X114X76 150X100X90 170X130X70
Power 2.8 kw 1.5 kw 3 kw 2.5 kw 5 kw 3.5 kw
Net Weight 400 Kg 250 Kg 500 Kg 250 Kg 700 Kg 400 Kg
Gross Weigt 500 Kg 350 Kg 600 Kg 350 Kg 850 Kg 500 Kg
Crate Size 140x130x110 152x140x80 150x150x120 165x135x95 170x120x110 190x150x95

Plate Making Tips :

Back Exposure
Expose UV light from the back side of
Photopolymer to make floor first.


Contact of Negative film
Peel-off protective film. Contact the emulsion side of
negative onto the surface of Photopolymer


Main Exposure Expose
UV light through the negative.


Wash-out
Remove the negative, and process the plate in Flate
Photopolymer washout unit.


Drying
After wiping off the surface moisture by sponge roll, dry
in a hot air dryer 60


Post-exposure
Expose UVA light again to complete photo-curing.


After-treatment
Expose UVC Germicide lamp as light finishing in order
to remove surface stickiness.